×

BFM

1, Software environment: HY-V software package under Chinese and English WindowsXP platform.
2, Language selection: with Chinese simplified, Chinese traditional, English and other language interface in the operation of free switching, the great convenience of the operator.
3, Unit conversion: common force and displacement, energy has and can be freely converted.
4, Basic functions: Calculation and list data graphics: basic parameters with the material testing machine: 1. 2.0.2%off set 3. yield point yield strength tensile strength elongation of 6. 4. 5. 7 8., the maximum energy absorption value of 9. fracture deformation 10. average of 11. compared with twenty types of graphics parameters.
5, A variety of curve display modes: stress - strain, strength - displacement, strength - time, strength - time and so on.
6, Application of data: using database management testing and standards to enable the author to build data or build it by itself.
7, Test mode: including tensile bending. Compressive bending. Adhesive.. tear. Peel. Elongation elongation...... Wait for a set.
8, Control mode: positioning shift, fixed speed, fixed strain rate, fixed load, fixed load rate, stress rate, etc.
9, Convenient and practical zero setting function: strength, elongation and displacement can be manually adjusted to zero by pressing a key, and at the same time, the system automatically performs zero adjustment function at the beginning of testing.
10, Dynamic display: during the test, load, elongation, displacement and selected test curves are displayed on the main control screen in real time with the test carried out.
11, Peak retention: during the whole process of testing, the maximum value of the test project is always displayed on the screen window following the test.
12, Manual point taking function: special manual point taking function in the test process.
13, Automatic discrimination: after the failure of the sample, the system automatically recognizes and automatically switches the next function according to the desired test requirements.
14, Automatic storage: test conditions, test results, distance position automatic storage.
15, Automatic Regression: with the completion of the test, the board automatically returns to the starting point function of the test.
16, Graphic analysis: after testing, we can use mouse to view data from the test curve. Any point on the test curve can be enlarged locally and can be printed.
17, Curve comparison: the curve of the same sample can be superimposed.
18, Report output: the graphics and parameters are open to the customer to modify according to the needs. Different report formats can be output. It is convenient and easy to learn and practical.
19, Extending the range of function: sensors, can be equipped with different sizes of clamps to expand the measurement range, so as to realize the test accuracy more accuracy.
20, Automatic fault detection: when the servo system fails, it can automatically diagnose the cause of the failure and automatically store the fault code in the servo driver, so as to find and troubleshoot quickly.